Beranda · Mesin pengerasan induksi
LZ Induction Heating Systems
Mesin pengerasan induksi
Mesin pengerasan induksi dari LZ Induction Heating Systems. Data katalog: surface hardening for shafts, gears, tools; HF and MF power supplies. Daya catu daya bukan berat logam dan bukan jumlah produksi. Tersedia banyak model dan mesin dapat dibuat sesuai logam, benda kerja, dan tegangan. Ekspor ke Eropa, Amerika Serikat, Brasil, dan lebih dari 25 negara.
Aplikasi umum
- Shafts
- Gears
- Pins
- Tools
- Guide rails
Model katalog
| Work diameter | Typical power | Typical frequency | Case, lower | Case, upper | Case, total |
|---|---|---|---|---|---|
| Under 5 mm (0.20 in) | under 30 kW | over 35 kHz | 0.65 mm (0.03 in) | 2.6 mm (0.10 in) | 1.3 mm (0.05 in) |
| 5–15 mm (0.20–0.59 in) | 30–50 kW | about 20 kHz | 0.9 mm (0.04 in) | 3.5 mm (0.14 in) | 1.75 mm (0.07 in) |
| 15–30 mm (0.59–1.18 in) | 50–80 kW | about 10 kHz | 1.25 mm (0.05 in) | 5.0 mm (0.20 in) | 1.9 mm (0.07 in) |
| 30–200 mm (1.18–7.87 in) | 80–150 kW | about 8 kHz | 1.3 mm (0.05 in) | 5.5 mm (0.22 in) | 2.7 mm (0.11 in) |
| 200–500 mm (7.87–19.69 in) | 150–350 kW | about 6 kHz | 1.6 mm (0.06 in) | 6.5 mm (0.26 in) | 3.25 mm (0.13 in) |
| 500–800 mm (19.69–31.5 in) | 300–500 kW | about 4 kHz | 1.6 mm (0.06 in) | 7.9 mm (0.31 in) | 5 mm (0.20 in) |
| 800–1200 mm (31.5–47.24 in) | 500–800 kW | about 2.5 kHz | 2.4 mm (0.09 in) | 10 mm (0.39 in) | 8 mm (0.31 in) |
| Over 1500 mm (59.06 in) | 800–1200 kW | about 1 kHz | 2.5 mm (0.10 in) | 16 mm (0.63 in) | 8 mm (0.31 in) |
Angka diambil dari katalog LZ. Daya, frekuensi, dan kapasitas bergantung pada logam, koil, lapisan, siklus kerja, dan tegangan. Minta proposal teknis sebelum memesan. Angka dalam tanda kurung adalah satuan AS (pon, inci, kaki, °F, psi).
Pencarian: tungku induksi, tungku peleburan induksi, pemanasan induksi, brazing induksi, pengerasan induksi.