Home · Fastener Induction Forging Machine
LZ Induction Heating Systems
Fastener Induction Forging Machine
Nuts, bolts and special fasteners need a repeatable hot zone, not a general-purpose coil. The catalogue matches diameter and length to a JLC or JLZ supply. Nuts from about 16 mm to 100 mm and screws in the same diameter bands are listed with recommended models from JLC-30/50 up to JLZ-160/360. The heater sits ahead of the forging press. Send the grade, the diameter, the length under the head and the pieces per minute.
What to check before you enquire
- Diameter and length pick the model.
- JLC for the smaller diameters, JLZ for the larger.
- Hot zone for heading and forging.
- Auto and general fastener plants.
Typical applications
- Nuts
- Bolts
- U-bolts
- Special fasteners
Catalogue models
| Work | Size | Recommended models |
|---|---|---|
| Nut | Ø16–20 mm | JLC-30/50 |
| Nut | Ø20–35 mm | JLC-60/80/120 |
| Nut | Ø35–50 mm | JLC-110/160 |
| Nut | Ø50–100 mm | JLZ-260/300 |
| Screw | Ø16–20 × 40 mm | JLC-30/50 |
| Screw | Ø22–30 × 50 mm | JLC-60/160 |
| Screw | Ø32–40 × 50 mm | JLZ-70/110 |
| Screw | Ø40–100 × 50 mm | JLZ-160/360 |
Figures are taken from the LZ catalogue. Final power, frequency and capacity depend on the metal, coil, lining, duty cycle and your mains voltage. Ask for a technical proposal before you order.
Buyers also search: induction melting furnace, medium frequency induction furnace, high frequency induction heating machine, induction brazing machine, induction hardening machine, Induktionsschmelzofen, four de fusion par induction, horno de inducción, forno a induzione, forno de indução.